Aluminum Track Fitting 4,000 lb Capacity w/ Alum. Keeper Tiedowns 12-Pack

#ad
Fittings for Aluminum Track-Multi Packs 40890-03-12 #ad - The steel stud/center post is zinc plated to inhibit corrosion. The fittings' aluminum base will not rust. Requires the W. L. L. We refer to the track as aluminum load track. It is also commonly referred to as airplane track, seat or simply S track. Rated capacity: also known as assembly capacity or break strength is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new.

This fitting fits all aluminum track that is similar to the track shown in the secondary image above. Single stud refers to the number of "fingers" that it captures when attached. Single stud w/ stainless Steel "O" ring - 4, 000 lb. Capacity rating. W. L. L. To attach, rest the fitting in the load track, then push down on the base and push forward.

Aluminum Track Fitting 4,000 lb Capacity w/ Alum. Keeper Tiedowns 12-Pack #ad - The single stud fitting attaches to one set of "fingers" in the load track. Requires the W. L.

#ad



RB Components 2495-S L Track End Cap, Black

#ad
RB Components B0168K1H5C #ad - The end caps may not work with other manufacturer's or brands of angled L-track. Sold in sets of 2. Screw type and size is dictated by mounting substrate. Mounting screws for end caps are not included with this set. These end caps were designed for use with Kinedyne LLC L-track # FE752-01-PD4. Use with kinedyne #fe752-01-PD4 Angled L-Track.

Made of durable, impact Resistant H. D. P. E. Sold in sets of 2. Complete the finished look of your angled L-track with our protective end caps, made of durable and impact resistant H. D. P. E.

#ad



6 Foot Aluminum L-Track

#ad
US Cargo Control #ad - Width:1-3/8". Made of durable, impact Resistant H. D. P. E. Sold in sets of 2. Aluminum: Grade 6351. Length: 6'. Please note: while l-track is also known as aircraft-style seat or airline track, it is not approved by the FAA for use in an aircraft. Also available in a 12 foot length: 12' Aircraft Style Seat / Airline Track.

Number of holes per track: 18. Use with kinedyne #fe752-01-PD4 Angled L-Track. The lightweight aluminum can also be cut to length as needed. High quality tie down rail is constructed of grade 6351 aluminum for the most rugged style of L-track available on the market. Height: 1/2". Manufactured with 18 pre-drilled holes one every 4" for fast and easy installation.

6 Foot Aluminum L-Track #ad - The 6 foot length is a versatile choice for all types of tie down applications, and is compatible with all of our l-track fittings including single stud fittings and double stud fittings.

#ad



US Cargo Control 8 Piece Powersports Aluminum 4 Foot L Track Tie Down System

#ad
US Cargo Control COMINU002110 #ad - Number of holes per track - 10 Versatile kit includes four sections of 4' L-track that can be mounted to the walls or floors of trailers or truck beds to create multiple tie down points. Great for tying down and securing motorcycles, ATVs, dirt bikes, etc.4 - 48" aluminum l-track Tie Down Rails. Length: 6'.

Made of durable, impact Resistant H. D. P. E. Sold in sets of 2. Height: 1/2". Number of holes per track: 18. Use with kinedyne #fe752-01-PD4 Angled L-Track. Aluminum: Grade 6351. Easy to install. Number of holes in each track: 104 - aluminum Single Stud Fittings. Fasteners not included; sold separately. Width:1-3/8". Simply insert any of the four single stud fittings into the track and use the stainless steel ring to hook tie down straps, bungee cords, etc.

#ad



Cargo Equipment Corp. L Track Hooks SM

#ad
Cargo Equipment Corp. #ad - Length: 6'. Great for tying down and securing motorcycles, dirt bikes, ATVs, etc.4 - 48" aluminum l-track Tie Down Rails. Width:1-3/8". Use with kinedyne #fe752-01-PD4 Angled L-Track. Aluminum: Grade 6351. Easy to install. Made of durable, impact Resistant H. D. P. E. Sold in sets of 2. Height: 1/2". 4 - aluminum Single Stud Fittings.

Number of holes per track: 18. Number of holes per track - 10 Hooks for l-track the brand new SM, MED, LG J hook L-track hook lineup.

#ad



10 PACK L-TRACK DOUBLE LUG THREADED STUD FITTING

#ad
Cargo Equipment Corp. #ad - Easy to install. Working load limit: 2, 166 lbs / 982 kgs. This l track fitting is designed to give you a heavy duty bolt down location on any style of L Track. Aluminum: Grade 6351. Length: 6'. Width:1-3/8". 4 - aluminum Single Stud Fittings. Great for tying down and securing motorcycles, ATVs, dirt bikes, etc.4 - 48" aluminum l-track Tie Down Rails.

Bolt threads are 3/8 - 24 UNF. Height: 1/2". Use with kinedyne #fe752-01-PD4 Angled L-Track. The specially milled washer has two oval dimples that drop down into the L Track and firmly lock the fitting in the track. Number of holes per track - 10 Number of holes per track: 18. Made of durable, impact Resistant H.

10 PACK L-TRACK DOUBLE LUG THREADED STUD FITTING #ad - D. P. E. Sold in sets of 2.

#ad



Aluminum Track Tiedown Fitting 5,000 lb. Capacity Tiedowns 8-Pack

#ad
Fittings for Aluminum Track-Multi Packs 47566-11-08 #ad - This fitting fits all aluminum tracking similar to the track in the image above. Working load limit: 2, 166 lbs / 982 kgs. As a rule of thumb you lose about half your rating at a 45 degree angle. This fitting fits all aluminum track that is similar to the track shown in the secondary image above. It is not recommended to pull at an angle greater than 45 degrees.

Easy to install. The fittings' steel base is zinc plated to inhibit corrosion. Requires the W. L. L. Great for tying down and securing motorcycles, dirt bikes, ATVs, etc.4 - 48" aluminum l-track Tie Down Rails. To be 1/3 of the Rated Capacity. To assist in making the proper tie-down choice the Federal D. O. T. To be 1/3 of the Rated Capacity.

Aluminum Track Tiedown Fitting 5,000 lb. Capacity Tiedowns 8-Pack #ad - The fitting is spring loaded to permit simple attach and detach operation. Number of holes per track - 10 W.

#ad



4 Pack Round Anchor Point Tie Down Kit, Bolt On Fitting Kit with Quick Release Tie Down Anchor

#ad
FishYuan #ad - The maximum load weight a tie-down should be subjected to during normal use. 1-1/8inch dia; stainless ring assembles quickly and easily, detaches from contoured base, leaving no protruding hardware when the tie down point is not in use. 1/4" thick steel "o" ring measures 2" in diameter, large enough and plenty strong enough to handle 2 or 3 tiedowns at the same time.

The steel fittings and O-ring are zinc plated to inhibit corrosion. Great for aTV's, motorcycles or snowmobiles. To attach, then push down on the base and push forward. Double stud refers to the number of "fingers" that it captures when attached to the aluminum track. Each round track piece has two pre-drilled holes for fast and easy installation.

4 Pack Round Anchor Point Tie Down Kit, Bolt On Fitting Kit with Quick Release Tie Down Anchor #ad - We refer to the track as aluminum load track. Anchors and stud fittings are finished with black powder coat paint. Bolt threads are 3/8 - 24 UNF. Length: 6'. It is also commonly referred to as airplane track, 000 lbs. Number of holes per track - 10 Easy to install.

#ad



6 Foot Aluminum L-Track 4 Pack

#ad
US Cargo Control #ad - Working load limit: 2, 166 lbs / 982 kgs. To attach, then push down on the base and push forward. Double stud refers to the number of "fingers" that it captures when attached to the aluminum track. It is also commonly referred to as airplane track, 000 lbs. This listing is for eight 8 double stud fittings with a rated capacity* of 5, 666 lb.

The 6 foot length is a versatile choice for all types of tie down applications, and is compatible with all of our l-track fittings including single stud fittings and double stud fittings. Length: 6'. Width:1-3/8". Number of holes per track - 10 The W. L. L. Working load limit is a 1, seat or simply S track. Rated capacity: also known as assembly capacity or break strength is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new.

6 Foot Aluminum L-Track 4 Pack #ad - Requires the W. L. L. Manufactured with 18 pre-drilled holes one every 4" for fast and easy installation.

#ad



L-TRACK TIE DOWN KIT 12 INCH

#ad
Cargo Equipment Corp. #ad - Use with kinedyne #fe752-01-PD4 Angled L-Track. Aluminum: Grade 6351. We refer to the track as aluminum load track. Easy to install. Width:1-3/8". To attach, then push down on the base and push forward. Double stud refers to the number of "fingers" that it captures when attached to the aluminum track. Working load limit: 2, 166 lbs / 982 kgs.

Width: 1. 2 in. Working load limit of 1, 000 lbs. Pre-drilled track can be quickly and easily installed on the trailer floor. Length: 12 in. Requires the W. L. L. Number of holes per track: 18. The W. L. L. Working load limit is a 1, seat or simply S track. Rated capacity: also known as assembly capacity or break strength is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new.

L-TRACK TIE DOWN KIT 12 INCH #ad - Please note: while l-track is also known as aircraft-style seat or airline track, it is not approved by the FAA for use in an aircraft.

#ad



CYC 5001, Double Stud Fitting with O-Ring. Application for Logistic Installation and L-Track Uses2-Pack

#ad
CYC #ad - 1/4" thick steel "o" ring measures 2" in diameter, large enough and plenty strong enough to handle 2 or 3 tiedowns at the same time. The steel fittings and O-ring are zinc plated to inhibit corrosion. Great for aTV's, motorcycles or snowmobiles. Please note: while l-track is also known as aircraft-style seat or airline track, it is not approved by the FAA for use in an aircraft.

Quantity: 4. Aluminum: Grade 6351. Includes aircraft quality single stud fitting with ring, a backing plate to add support to truck or van beds and sides, machined aluminum anchor plate, mounting hardware and installation instructions. Working load capacity is 500 pounds horizontal pull, 1000 pounds vertical pull.

CYC 5001, Double Stud Fitting with O-Ring. Application for Logistic Installation and L-Track Uses2-Pack #ad - Base measures 2-1/2" long x 7/8" wide. The maximum load weight a tie-down should be subjected to during normal use. Aluminum: Grade 6351. It is also commonly referred to as airplane track, 000 lbs. This fitting fits all aluminum track that is similar to the track shown in the secondary image above. We refer to the track as aluminum load track.

A quick disconnect fitting that can be installed in a pick-up bed, trailer or van, creating a detachable tie down point where ever you may need it. W.

#ad