Festool 574692 Router OF 1400 EQ Imperial

Festool 574692 - Our most versatile router packs 1400 watts into less than 10 lbs. System integration: designed for use with the FS Guide Rail system, MFS multi-routing templates, and a wide range of other accessory options. Precision depth adjustment: Micro-adjustability dial allows routing with tremendous precision. Attaches and releases quickly with tool-free spring clip system.

Integrated switches allow use with just one hand. It’s got enough power for most routing tasks, yet it's small enough to allow precise control. Ergonomic handles: festool routers are designed for increased control and reduced fatigue. Dust extraction: integrated dust extraction ports capture dust and debris at the point of creation, prolonging cutter life, increasing visibility, and saving valuable cleanup time.

Festool 574692 Router OF 1400 EQ Imperial - Swiveling chip deflector: can be used with edge forming bits, maximizing chip and dust extraction even around curves and corners.





Festool 492601 Guide Stop Adapter For OF 1400 And FS Guide Rails

Festool 492601 - Made in Germany. Attaches quickly and easily using two rods included in the scope of delivery of the OF 1400 router. Features fine-adjustment controls, allowing you to precisely adjust the distance to cut in increments of 1/10mm. Adapt the festool of 1400 router for use with the FS Guide Rail system for perfectly guided, straight routing.

Includes support foot to level the router with the surface of the guide rail, ensuring smooth, accurate results and increased stability. For attaching of 1400 EQ router to guide rail system.





Festool 492636 Parallel Edge Guide With Fine Adjustment For OF 1400 Router

Festool 492636 - Adapt the festool of 1400 router for use with the FS Guide Rail system for perfectly guided, straight routing. Features fine-adjustment controls, allowing you to precisely adjust the distance to cut in increments of 1/10mm. Constructed from durable cast aluminum, and includes fiber-reinforced plastic thumbscrews for easy adjustment and a long service life.

Attaches quickly and easily using two rods included in the scope of delivery of the OF 1400 router. Edge guide for use with the of 1400 EQ Router, allows you to run the router parallel to an edge. Made in Germany. Attaches quickly and easily using integrated thumbscrews and two steel rods included in the router's scope of delivery.

Festool 492636 Parallel Edge Guide With Fine Adjustment For OF 1400 Router - Rout up against, grooves, flutes, for precise dados, ploughs, or perfectly parallel to the material edge, rabbets and profiles. Fine-adjustment control allows you to dial in the distance from the material edge in increments of 1/10mm for ultra-precise routing. Dust extraction hood enables ultra-efficient dust extraction, saving valuable cleanup time.

Includes support foot to level the router with the surface of the guide rail, ensuring smooth, accurate results and increased stability.





Festool 491594 Quick Clamp For MFT And Guide Rail System, 6 5/8" 168mm

Festool 491594 - Made in Germany. Designed to work seamlessly with holes and channels on the the Festool MFT Multifunction Table and can be inserted into bottom t-slot of Festool FS Guide Rails for limitless positioning. Dust extraction hood enables ultra-efficient dust extraction, saving valuable cleanup time. Clamping thickness 6-5/8 inches 168mm.

Includes support foot to level the router with the surface of the guide rail, ensuring smooth, accurate results and increased stability. Features fine-adjustment controls, allowing you to precisely adjust the distance to cut in increments of 1/10mm. Clamping thickness 6 5/8 inches 168mm. Attaches quickly and easily using two rods included in the scope of delivery of the OF 1400 router.

Festool 491594 Quick Clamp For MFT And Guide Rail System, 6 5/8" 168mm - The perfect complement to the festool mft or Guide rail system, sanding, routing, the Festool Quick Clamp secures your workpiece for precision cutting, sanding, or just about any other application. Secures your workpiece for precision cutting, sanding, routing, sanding, or just about any other application.

Ratcheting mechanism enables easy locking and quick release for a a more efficient workflow. Includes 1 clamp. Clamping thickness 6-5/8 inches 168mmSecures your workpiece for precision cutting, routing, sanding, sanding, or just about any other application.





Festool 482107 Guide Rail Connector

Festool 482107 - Set screws are slotted to prevent over-tightening the rail. Features fine-adjustment controls, allowing you to precisely adjust the distance to cut in increments of 1/10mm. Dust extraction hood enables ultra-efficient dust extraction, saving valuable cleanup time. Adapt the festool of 1400 router for use with the FS Guide Rail system for perfectly guided, straight routing.

Attaches quickly and easily using two rods included in the scope of delivery of the OF 1400 router. Made in Germany. Fits all guide rails. Rout up against, grooves, or perfectly parallel to the material edge, ploughs, for precise dados, flutes, rabbets and profiles. Fine-adjustment control allows you to dial in the distance from the material edge in increments of 1/10mm for ultra-precise routing.

Festool 482107 Guide Rail Connector - Constructed from durable cast aluminum, and includes fiber-reinforced plastic thumbscrews for easy adjustment and a long service life. Use to connect two guide rails for long workpieces. Secures your workpiece for precision cutting, routing, sanding, sanding, or just about any other application. Ratcheting mechanism enables easy locking and quick release for a a more efficient workflow.

Steel bars with 4 set screws secure connectors, ensuring straight cuts.





Festool FS1400/2-LR32-55"1400 mmGuide Rail with holes For Drilling. Model-496939

Tooltechnic Systems LLC 496939 - Rout up against, for precise dados, flutes, or perfectly parallel to the material edge, grooves, ploughs, rabbets and profiles. Fine-adjustment control allows you to dial in the distance from the material edge in increments of 1/10mm for ultra-precise routing. Set screws are slotted to prevent over-tightening the rail.

Clamping thickness 6 5/8 inches 168mm. The fs fs 1400/2-lr 32 guide rail 55 -inch was designed specifically for use with Festool Routers and the LR 32 Hole Drilling System to construct cabinets using the European frameless 32mm system for shelf pins and hardware. Works seamlessly with holes and channels of the the MFT table and can be inserted into bottom t-slot of guide rails for limitless positioning.

Includes 1 clamp. Dust extraction hood enables ultra-efficient dust extraction, saving valuable cleanup time. A fully integrated system, plunge saws, use your Festool routers, or jigsaws with the guide rail for expanded capability. Guide strip reduces friction between the tool and guide rail for easier, more fluid cutting action.

Festool FS1400/2-LR32-55"1400 mmGuide Rail with holes For Drilling. Model-496939 - Festool fs guide rails are available in eight different lengths from 32 -Inch to 197 -Inch 800 - 5000 mm, providing the right rail for every application. Quickly and easily align and machine holes for shelf pins and 35 millimeter cup hinges. Attaches quickly and easily using integrated thumbscrews and two steel rods included in the router's scope of delivery.





Festool 491498 55" Guide Rail FS 1400 1400mm

Festool 491498 - Can also be used to connect Festool MFS templates. Connect a limitless number of guide rails for long cuts with Festool Guide Rail Connectors. Fits all guide rails. Constructed from durable cast aluminum, and includes fiber-reinforced plastic thumbscrews for easy adjustment and a long service life. Set screws are slotted to prevent over-tightening the rail.

Quickly and easily align and machine holes for shelf pins and 35 millimeter cup hinges. Made in Germany. Non-skid, dual-clamping rubber strips prevent movement during the cutting operation, saving significant set up time. A fully integrated system, plunge saws, use your Festool routers, or jigsaws with the guide rail for expanded capability.

Guide strip reduces friction between the tool and guide rail for easier, more fluid cutting action. Available in eight different lengths, there’s an ideal rail for every application. Adapt the festool of 1400 router for use with the FS Guide Rail system for perfectly guided, straight routing. Dust extraction hood enables ultra-efficient dust extraction, saving valuable cleanup time.

Festool 491498 55" Guide Rail FS 1400 1400mm - A fully integrated system, use your Festool routers or jigsaw with the guide rail for expanded capability. Secures your workpiece for precision cutting, sanding, sanding, routing, or just about any other application. Ratcheting mechanism enables easy locking and quick release for a a more efficient workflow.





Festool 584100 LR 32 Hole Drilling Set In Systainer 1

Festool 584100 - Attaches quickly and easily using integrated thumbscrews and two steel rods included in the router's scope of delivery. Non-skid, dual-clamping rubber strips prevent movement during the cutting operation, saving significant set up time. Attaches quickly and easily using two rods included in the scope of delivery of the OF 1400 router.

Guide strip reduces friction between the tool and guide rail for easier, more fluid cutting action. Includes: guide plate, 2 edge stops, wrench, Centering mandrel, 35mm european hinge boring bit, 2 linear stops, 2 clamps, 2 5mm shelf pin bits. Festool 584100 lr 32 hole drilling set in systainer 1 adapt the festool of 1400 router for use with the FS Guide Rail system for perfectly guided, straight routing.

Festool 584100 LR 32 Hole Drilling Set In Systainer 1 - Clamping thickness 6 5/8 inches 168mm. Steel bars with 4 set screws secure connectors, ensuring straight cuts. Includes support foot to level the router with the surface of the guide rail, ensuring smooth, accurate results and increased stability. Can also be used to connect Festool MFS templates. For use with festool of 1010 router and guide rail system, the LR 32 System is supported by a 42in, 55in and a 95in rail sold separately.

Works seamlessly with holes and channels of the the MFT table and can be inserted into bottom t-slot of guide rails for limitless positioning. Includes 1 clamp.





Festool 575387 Plunge Cut Track Saw Ts 55 Req-F-Plus USA

FESTOOL 575387 - Includes support foot to level the router with the surface of the guide rail, ensuring smooth, accurate results and increased stability. With its accuracy and versatility, a better comparison would be to the most advanced Table saws, Miter saws or panel saws available. For placing cup hinges 35mm or setting shelf pin holes in casework.

Precisely and efficiently build cabinets using the European frameless 32 mm system. Connect a limitless number of guide rails for long cuts with Festool Guide Rail Connectors. The ts req is not your standard Circular saw. Set screws are slotted to prevent over-tightening the rail. Use the fs 1400 guide rail 55 inches with the Festool TS Plunge cut saw to make precision cuts up to 49 inches long.

Festool 575387 Plunge Cut Track Saw Ts 55 Req-F-Plus USA - A fully integrated system, plunge saws, use your Festool routers, or jigsaws with the guide rail for expanded capability. Guide strip reduces friction between the tool and guide rail for easier, more fluid cutting action. The fs 1400/2-lr 32 guide rail 55-inch with the Festool Plunge cut saw to cut material up to 49-Inch.

Portable line boring system allows you do in the field what has traditionally been a shop-only job. Works seamlessly with holes and channels of the the MFT table and can be inserted into bottom t-slot of guide rails for limitless positioning. Includes 1 clamp.





Festool 495020 Systainer Cart

Tooltechnic Systems LLC 495020 - A fully integrated system, use your Festool routers or jigsaw with the guide rail for expanded capability. Compatible with Classic and T-LOC Systainers. Use the fs 1400 guide rail 55 inches with the Festool TS Plunge cut saw to make precision cuts up to 49 inches long. Guide strip reduces friction between the tool and guide rail for easier, more fluid cutting action.

. Fits systainers sizes 1 to 5 and Sortainers. Dust extraction hood enables ultra-efficient dust extraction, saving valuable cleanup time. Constructed from durable cast aluminum, and includes fiber-reinforced plastic thumbscrews for easy adjustment and a long service life. Fits all guide rails. Secures your workpiece for precision cutting, routing, sanding, sanding, or just about any other application.

Festool 495020 Systainer Cart - Ratcheting mechanism enables easy locking and quick release for a a more efficient workflow. Combine this guide rail with the Festool LR 32 Hole Drilling System to efficiently build European style 32mm cabinets. Attaches quickly and easily using two rods included in the scope of delivery of the OF 1400 router.

Connect a limitless number of guide rails for long cuts with Festool Guide Rail Connectors. Includes support foot to level the router with the surface of the guide rail, ensuring smooth, accurate results and increased stability.





Festool 575389 Plunge Cut Track Saw Ts 75 EQ-F-Plus USA

FESTOOL 575389 - When used with festool guide rails, you can achieve perfectly straight and splinter-free cuts. Spring-loaded riving knife splitter keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback. The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor.

Blade changes are easier and safer using the fastfix system which locks switch and arbor simultaneously for easy arbor bolt removal. Fits all guide rails. Adapt the festool of 1400 router for use with the FS Guide Rail system for perfectly guided, straight routing. Use the fs 1400 guide rail 55 inches with the Festool TS Plunge cut saw to make precision cuts up to 49 inches long.

Festool 575389 Plunge Cut Track Saw Ts 75 EQ-F-Plus USA - Made in Germany. Quickly and easily align and machine holes for shelf pins and 35 millimeter cup hinges. Includes support foot to level the router with the surface of the guide rail, ensuring smooth, accurate results and increased stability. Includes: guide plate, centering mandrel, 35mm european hinge boring bit, 2 edge stops, 2 clamps, 2 linear stops, wrench, 2 5mm shelf pin bits.

When used with festool guide rails, you can achieve perfectly straight and splinter-free cuts. Spring-loaded riving knife splitter keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback.