LEE Filters 100mm Graduated Neutral Density Soft Edge Filter Set 0.3, 0.6 and 0.9 Filters 100x150mm

#ad
Lee Filters LYSB00683D6WW-ELECTRNCS #ad - Moving the filter up within the holder will allow for more foreground than skyline, you have ultimate creative control! The purpose of the ND grad is to reduce the brightness of selected areas of the frame, balancing out the exposure throughout the frame. The soft edge grad filter is also used on occasions when the effect of a hard edge grad would be apparent in the resulting image, showing as a 'line' across the composition.

These filters are rectangular in shape so that you, the photographer, have the ability to manipulate where the grad line falls within the frame. A true neutral density grad should have no impact on color balance, and because LEE filters are perfectly neutral, your images will be true to what you see in nature.

LEE Filters 100mm Graduated Neutral Density Soft Edge Filter Set 0.3, 0.6 and 0.9 Filters 100x150mm #ad - The transition between the clear and neutral density portions of a soft edge graduated filter is less sharp and more subtle than in a hard edge graduated filter. The transition in tones, from bright to dark, should appear very natural when using a soft grad. If you wish to have more skyline than foreground simply move the filter down within the holder.

A soft edge grad filter is recommended when the variation in light readings within a scene is less pronounced or the horizon line has any deviation, such as mountains, trees or rock formations. This graduated Neutral Density Filter Set includes the 03 1-stop, 06 2-stop, and 0

#ad



Lee Filters 77mm wide angle adapter ring

#ad
Lee FHWAAR77C #ad - Please note: this is not compatible with the Lee Seven 5 or SW150 Filter systems. It screws onto the camera's lens and the Lee 100mm FK Foundation Kit Holder is then secured to the adapter ring with the 3 part spring loaded brass wedge. The wide angle adapter ring is suitable for use with wide angle lenses.

. The wide angle adapter ring could really be considered a universal adapter ring as it can be used on any lens, even if it is not a wide angle lens. Lee filters 77 W/A Adapter Ring. Lee filters wide Angle 77mm Adapter Ring. It differs from the standard adapter ring by sitting closer to the front element of the camera's lens, as the threads are recessed into the adapter ring so that the adapter ring slightly overlaps the lens.

Lee Filters 77mm wide angle adapter ring #ad - As a result, the likelihood of vignetting is dramatically reduced. The adapter ring is crucial to the LEE 100mm Filters system.

#ad



Lee Filters Foundation Kit / Filter Holder

#ad
Lee Filters FHFK #ad - . Contact us if you need more help. Lee filters foundation Kit / Filter Holder. You will need to purchase suitable adaptor rings to allow you to attach the filter holder to your lens. Lee filters 77 W/A Adapter Ring. This is the lee filter holder foundation kit for 100mm system LEEFHFK The Lee Filter Holder Foundation Kit FHFK 202666 is fundamental to the Lee Filters system.

Lee Filters Foundation Kit / Filter Holder #ad - It takes standard 100mm filters, and can be constructed to take up to three filters at any one time remember, the more filter guides added, though, the higher the likelihood of vignetting with wideangle lenses. Filter holder and components to create three filter slots. The foundation kit, in turn, clips onto the adaptor ring which, like all others, screws onto your camera's lens.

#ad



Lee Filters 82mm wide angle adapter ring

#ad
Lee Filters FHWAAR82C #ad - Please note: this is not compatible with the Lee Seven 5 or SW150 Filter systems. It screws onto the camera's lens and the Lee 100mm FK Foundation Kit Holder is then secured to the adapter ring with the 3 part spring loaded brass wedge. The wide angle adapter ring could really be considered a universal adapter ring as it can be used on any lens, even if it is not a wide angle lens.

. Filter holder and components to create three filter slots. It differs from the standard adapter ring by sitting closer to the front element of the camera's lens, as the threads are recessed into the adapter ring so that the adapter ring slightly overlaps the lens. The adapter ring is crucial to the LEE 100mm Filters system.

Lee Filters 82mm wide angle adapter ring #ad - The wide angle adapter ring is suitable for use with wide angle lenses. As a result, the likelihood of vignetting is dramatically reduced. Lee filters foundation Kit / Filter Holder. Lee filters 77 W/A Adapter Ring. Lee filters wide Angle 58mm Adapter Ring. Lee filters 82 W/A Adapter Ring.

#ad



Lee Filters 100 x 100mm Little Stopper 1.8 Neutral Density Filter

#ad
Lee Filters 49996581 #ad - Lee filters 82 W/A Adapter Ring. Lee filters foundation Kit / Filter Holder. The little stopper is our core 100mm System and refers to the light stopping power  – not size. Filter holder and components to create three filter slots. Both the big stopper & little Stopper can be used in conjunction with other filters such as Neutral Density Graduated Filters.

Features: 1. 8 nd filter darkens the image, allowing you to photograph with a longer shutter speed or wider aperture than normally required. Providing a 6-stop exposure reduction, this filter allows you to control depth of field and convey movement more easily. 6-stop neutral density filterincrease exposure lengthHelps to Convey MovementHigh Quality Optical GlassCompatible with 100mm Filter Holder Lee filters 77 W/A Adapter Ring.

Lee Filters 100 x 100mm Little Stopper 1.8 Neutral Density Filter #ad - Warranted Against Manufacturing Defects. At six stops, the little stopper is ideal for those low-light conditions at the beginning and end of the day when the Big Stopper's ten stops may prove too much, allowing you to enjoy increased flexibility with exposure lengths. In many shooting conditions, this means that detail and texture in areas of movement such as the sky and water would be retained, while still conveying a sense of time passing.

. Cordura Protective Pouch. The 100 x 100mm Little Stopper 1.

#ad



Lee Filters 100mm Big Stopper 3.0 Neutral Density Filter 10-stops

#ad
Lee Filters BS10100U2 #ad - Increase exposure lengthhelps to convey MovementQuality Optical GlassCompatible with 100mm Filter Holder Lee filters 77 W/A Adapter Ring. The 100 x 100mm Big Stopper 3. 0 neutral density filter from LEE Filters is a solid neutral density filter providing a 10-stop reduction in exposure. Cordura Protective Pouch.

Lee Filters 100mm Big Stopper 3.0 Neutral Density Filter 10-stops #ad - Lee filters 82 W/A Adapter Ring. Lee filters 100 x 100mm big stopper 3. 0 neutral density filter - Tin Filter Case - Lee Filters Warranty. By slowing your exposure time or increasing your aperture, you are able to control depth of field and convey movement more easily. This filter is constructed from a high quality optical glass for high definition and clarity.

This 3. 0 density creates a darkening of the entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required. Lee filters foundation Kit / Filter Holder. Filter holder and components to create three filter slots. This filter measures 3. 9 x 3. 9" / 100 x 100mm. 3.

#ad



LEE Filters LEE100 Filter Holder

#ad
Lee Filters 240422 #ad - Just use the pointed end of the tool to remove the guide block cover and the flat end to pop the guide block out. Lee filters had its many loyal followers in mind and made sure that the LEE100 Holder is compatible with all current Lee Filters Adapters and 100mm Filters. Brand new design - LEE100 Holder. Warranted Against Manufacturing Defects.

The big stopper: a glass filter that reduces exposure by approximately 10 stops. Available in the following sizes: Glass Camera Filter 100mm x 100mm. You can upgrade your Lee Filter Holder without having to buy all new Adapters. The risk of the filter holder accidentally falling off has long been a concern for the Lee FK Holder, with the redesigned lock dial this holder will always stay safe and secure.

This means you can confidently angle your Graduated ND filter without worrying about knocking the filter holder off the adapter ring. Lee filters foundation Kit / Filter Holder. After you place the holder on the adapter ring just rotate the large nodule on the dial up, this will lock the Filter Holder to the adapter ring but will not restrict rotational movement.

LEE Filters LEE100 Filter Holder #ad - No more screwdriver needed, with a guide block removal tool you can quickly and easily remove the guide block cover and switch out the modular filter guide block. Filter guide blocks. This also gives you the ability to adjust where the grad line falls within the frame without fear of the holder falling off or having to recompose your shot.

#ad



Haida 100 Series Insert 6 Piece Filter Pouch for Filter Holder, 100x100mm or 100x150mm Square or Rectangular Filters

#ad
Haida HD2515 #ad - Filter holder and components to create three filter slots. The big stopper: a glass filter that reduces exposure by approximately 10 stops. Available in the following sizes: Glass Camera Filter 100mm x 100mm. Lee filters foundation Kit / Filter Holder. Secure locking knob. Brand new design - LEE100 Holder. Warranted Against Manufacturing Defects.

Haida 100 Series Insert 6 Piece Filter Pouch for Filter Holder, 100x100mm or 100x150mm Square or Rectangular Filters #ad - Lee filters 82 W/A Adapter Ring. Lee filters 100 x 100mm big stopper 3. 0 neutral density filter - Tin Filter Case - Lee Filters Warranty. The haida 100 series insert filter pouch is designed to organize and carry 1 piece of Haida 100 Series filter holder and 6 pieces of 100x100mm or 100x150mm square or rectangular format filters.

Haida pouch for filter holder, square and rectangular filters. Protects filters and consolidates space in your camera bag. Cordura Protective Pouch. Filter guide blocks. Made from high quality durable nylon. Lee filters 77 W/A Adapter Ring. Fits 6 100x100mm or 100x150mm filters and holder.

#ad



Lee Filters 67mm wide angle adapter ring

#ad
Lee Filters FHWAAR67C #ad - It screws onto the camera's lens and the Lee 100mm FK Foundation Kit Holder is then secured to the adapter ring with the 3 part spring loaded brass wedge. For use with lee Filters FK Foundation Kit Holder. Cordura Protective Pouch. It differs from the standard adapter ring by sitting closer to the front element of the camera's lens, as the threads are recessed into the adapter ring so that the adapter ring slightly overlaps the lens.

Filter guide blocks. Lee filters 82 W/A Adapter Ring. Secure locking knob. Fits 6 100x100mm or 100x150mm filters and holder. Lee filters 77 W/A Adapter Ring. Please note: this is not compatible with the Lee Seven 5 or SW150 Filter systems. The wide angle adapter ring could really be considered a universal adapter ring as it can be used on any lens, even if it is not a wide angle lens.

Lee Filters 67mm wide angle adapter ring #ad - Lee filters 67mm Wide Angle Adapter ring. Filter holder and components to create three filter slots. The big stopper: a glass filter that reduces exposure by approximately 10 stops. Available in the following sizes: Glass Camera Filter 100mm x 100mm. Haida pouch for filter holder, square and rectangular filters.

#ad



Lee Filters 72mm wide angle adapter ring

#ad
Lee Filters FHWAAR72C #ad - Sits closer to the lens. Lee filters 77 W/A Adapter Ring. Filter holder and components to create three filter slots. Lee filters 67mm Wide Angle Adapter ring. Protects filters and consolidates space in your camera bag. Screws on the front of the lens. Lee filters foundation Kit / Filter Holder. Secure locking knob.

Filter guide blocks. Holds filter holder. Lee filters wide Angle 72mm Adapter Ring. The adapter ring is crucial to the LEE 100mm Filters system. The wide angle adapter ring could really be considered a universal adapter ring as it can be used on any lens, even if it is not a wide angle lens. The big stopper: a glass filter that reduces exposure by approximately 10 stops.

Lee Filters 72mm wide angle adapter ring #ad - Available in the following sizes: Glass Camera Filter 100mm x 100mm. Fits 6 100x100mm or 100x150mm filters and holder. As a result, the likelihood of vignetting is dramatically reduced. Cordura Protective Pouch. Haida pouch for filter holder, square and rectangular filters. Warranted Against Manufacturing Defects.

#ad



for use with LEE100 Filter Holder - LEE Filters LEE100 Polarizer

#ad
Lee Filters 240439 #ad - Screws on the front of the lens. Filter guide blocks. Brand new design - LEE100 Polarizer. Lee filters 67mm Wide Angle Adapter ring. Fits 6 100x100mm or 100x150mm filters and holder. Lee filters 77 W/A Adapter Ring. This lee100 polarizer is not compatible with the original LEE FK Foundation Kit Holder. Protects filters and consolidates space in your camera bag.

. Brand new design - LEE100 Holder. Lee filters foundation Kit / Filter Holder. Holds filter holder. The polarizer clips on to the lee100 holder in a fraction of a second, It's the fastest way to attach a Polarizer to any of the systems currently in the market, no screws or tools needed. Lee filters 100 x 100mm big stopper 3.

for use with LEE100 Filter Holder - LEE Filters LEE100 Polarizer #ad - 0 neutral density filter - Tin Filter Case - Lee Filters Warranty. Lee filters lee100 circular polarizer - the lee100 circular Polarizer comes with an integral ring that has a pair of built in clips to allow for safe and secure attachment to the LEE100 Holder. Warranted Against Manufacturing Defects. Haida pouch for filter holder, square and rectangular filters.

Sits closer to the lens. Cordura Protective Pouch.

#ad