As an Amazon Associate I earn from qualifying purchases.
Radio clock movement mechanism - auto adjusts time after summer time/winter time. First fix the movement to the main body of the middle case. With a hook, golden metal washer, and black rubber washer.
Install the battery, minute, otherwise, it will cause a time error. Receiving the local signals could get a more accurate time, and free your hands in every year! Diy wall clock repair parts kits - radio controlled clock movement size: 2. 6*2. 2*074 inch 66*56*19mm, golden hex nut, shaft length: 067 inch17mm, Screw thread length: 038 inch 9.

3. Battery size:aa/lr6(alkaline), whatever package problems or don't know how to setting, if you meet some issues when you using our product, please contact us freely.
Radio controlled clock movement size:2. 6*2. 2*074 inch 66*56*19mm, installation tips: 1. With golden hex nut, golden metal washer, black rubber washer. The length shaft of movement : total shaft length : 067 inch17mm, screw thread length : 034 inch 8. 7mm,fit about 0

The hour and minute hands are seconds to install the pointer for the standard 12, 3. Battery size:aa/lr6(alkaline), whatever package problems or don't know how to setting, please contact us freely.
5-12 inch 240-300mm material: hour& minute aluminum hand, 04mm thickness, second hand copper + aluminum material. Install the battery, it automatically searches for local signals. Material: 2 set hour& minute aluminum hand, 04mm thickness, second hand copper + aluminum material. First fix the movement to the main body of the middle case.

Mode: hr9312material: plastic and aluminumhose size: approx. 56x56x19mm/2. 20x2. 20x075insecond hand length:100mm/3. 94inminute hand length: 93mm/3. 66inhour hand length: 69. 5mm/2. 74inthread length: 14mm/055insuitable for thickness 2-3mm productColor: As pictures shownBattery: Not IncludedQuantity: 1 Set.

Measure from the center hole of the pointer to the top, hour hand 80mm. Minute hand :110mm. The hour and minute hands are seconds to install the pointer for the standard 12, it automatically searches for local signals.

Package contents: 1 clock movement with 1 hook, 2 Minute hands and some mounting hardware, 2 Hour hands, coming with specially designed box and instructions.

Warm notice: when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them.

Choose the suitable clock mechanism: total shaft length is 7/8 in, this kit fit clock dials from from 3/8 in - 1/2 in thick, thread length is 3/4 in, making you smile of the memories your old clock gives you.
Emoon diy clock repair kit: comes as 6 clock movements with 9 pack hands kit in a presentation box with custom foam inserts to protect all from scratching, bending, and other damage while shipping. Time-keeping and sweep movement motor: features High precision Clock Mechanism, ensures watchmaker's accuracy; silent movement; powered by a AA battery, easy hang up on the nail included.


Parameter of the kit: i shaft, high torque clock mechanism, drive long clock hands from 10 mm to 450 mm. Size from center of the hole to tip: the hour hand is 154 mm/ 6. 1 inch; minute hand is 208 mm/ 8.
1. WinTaim
#ad
43/64 inches 17mm Axis Length WWVB Radio Electric Controlled Clock, Auto Adjust Winter and Summer time, WinTaim Atomic Clock Movement with 4-inch Clock Hands
#adWinTaim #ad - Clock hands size - the size indicated in the picture shall prevail, please do not install them with too much pressure or they will be bent, they were made of aluminum, please check the sizes before buying. Pull out the positioning pin on the back of the movement.Radio clock movement mechanism - auto adjusts time after summer time/winter time. First fix the movement to the main body of the middle case. With a hook, golden metal washer, and black rubber washer.
More information #ad
Suitable for 10-12 inches Clock. Wide application - diy quartz wall clock replacement movement parts, replacing, three-dimensional embroidery, frameless draw clock, suitable for repairing, craft clock, or making a clock, most can be applied to cross-stitch, etc. Install the battery, minute, otherwise, it will cause a time error. Receiving the local signals could get a more accurate time, and free your hands in every year! Diy wall clock repair parts kits - radio controlled clock movement size: 2. 6*2. 2*074 inch 66*56*19mm, golden hex nut, shaft length: 067 inch17mm, Screw thread length: 038 inch 9.
Brand | WinTaim #ad |
Manufacturer | WinTaim #ad |
Part Number | 17mm wwvb |
Model | 17mm wwvb |
More information #ad
2. DEEWISH
#ad
DEEWISH Radio Clock Movement, 0.67 inch17mm Axis Length WWVB Radio Electric Controlled Clock Wall Clock Clockwork Scanning Quartz Drives
#adDEEWISH #ad - Install the battery, minute, it automatically searches for local signals. Recommend saving the pin if you need to restart clock movement 4. Measure from the center hole of the pointer to the top, minute hand :110mm.3. Battery size:aa/lr6(alkaline), whatever package problems or don't know how to setting, if you meet some issues when you using our product, please contact us freely.
More information #ad
First fix the movement to the main body of the middle case. We would show you our best services, please don't submit the return so fast. Material: hour& minute aluminum hand, 04mm thickness, second hand copper + aluminum material. Radio controlled clock movement size:2. 6*2. 2*074 inch 66*56*19mm, installation tips: 1. With golden hex nut, golden metal washer, black rubber washer. The length shaft of movement : total shaft length : 067 inch17mm, screw thread length : 034 inch 8. 7mm,fit about 0
Brand | DEEWISH #ad |
Manufacturer | DEEWISH #ad |
Height | 2.6 Inches |
Length | 2.2 Inches |
Width | 1.5 Inches |
Part Number | DEEWISH-001 |
Model | DEEWISH-001 |
More information #ad
3. DEEWISH
#ad
0.67 inch17mm Axis Length WWVB Radio Electric Controlled Clock, DEEWISH Radio Clock Mechanism DIY, Repair Wall Clock Clockwork with 2 Set Clock Hands
#adDEEWISH #ad - Radio controlled clock movement size:2. 6*2. 2*074 inch 66*56*19mm, installation tips: 1. With golden hex nut, golden metal washer, black rubber washer. 2. Pull out the positioning pin on the back of the movement.The hour and minute hands are seconds to install the pointer for the standard 12, 3. Battery size:aa/lr6(alkaline), whatever package problems or don't know how to setting, please contact us freely.
More information #ad
Dimension: measure from the center hole of the pointer to the top, hour hands: 3. 4inch 90mm+2. 75inch 705mm minute hands: 4. 7inch 120mm+4 inch 101mm Second hands:4. 7inch 120mm+4 inch 100mm applicable to the panel with a diameter of about 9. 5-12 inch 240-300mm material: hour& minute aluminum hand, 04mm thickness, second hand copper + aluminum material. Install the battery, it automatically searches for local signals. Material: 2 set hour& minute aluminum hand, 04mm thickness, second hand copper + aluminum material. First fix the movement to the main body of the middle case.
Brand | DEEWISH #ad |
Manufacturer | DEEWISH #ad |
Height | 0.75 Inches |
Length | 2.6 Inches |
Width | 2.2 Inches |
Part Number | DEEWISH-001 |
Model | DEEWISH-001 |
More information #ad
4. WT-YOGUET
#ad
WT-YOGUET Atomic Radio Controlled Silent Clock Movement DIY Kit Germany DCF Signal HR9312
#adWT-YOGUET #ad - The standard movement contains a miniaturized radio receiver that searches for the low frequency time signal that broadcasts from the Germany radio station DCF.Mode: hr9312material: plastic and aluminumhose size: approx. 56x56x19mm/2. 20x2. 20x075insecond hand length:100mm/3. 94inminute hand length: 93mm/3. 66inhour hand length: 69. 5mm/2. 74inthread length: 14mm/055insuitable for thickness 2-3mm productColor: As pictures shownBattery: Not IncludedQuantity: 1 Set.
More information #ad
Quality quartz clock movement and has long lifetime. Br/>energy efficient. The clock can automatically synchronize Germany DCF Signal. Simple and stylish design, great for repairing, replacing or making a clock. Accurate time keeping.Brand | WT-YOGUET #ad |
Manufacturer | WT-YOGUET #ad |
More information #ad
5. DEEWISH
#ad
17mm Axis Length WWVB Radio Electric Controlled Clock Scanning Quartz Wall Clock Clockwork Drives 66*56*19mm, HR9415+903, DEEWISH Radio Clock Movement
#adDEEWISH #ad - Pull out the positioning pin on the back of the movement. Material: hour& minute aluminum hand, 04mm thickness, second hand copper + aluminum material. With golden hex nut, black rubber washer.Measure from the center hole of the pointer to the top, hour hand 80mm. Minute hand :110mm. The hour and minute hands are seconds to install the pointer for the standard 12, it automatically searches for local signals.
More information #ad
The shaft length of movement : shaft length : 17 mm, golden metal washer, Screw thread length : 8. 7mm,fit about 6 mm thickness clock panel. Battery size:aa/lr6(Alkaline). 4. 2. Size:66*56*19mm, 3. Install the battery, Installation tips: 1. First fix the movement to the main body of the middle case. Second hand: 100mm, applicable to the panel with a diameter of about 240-300mm.Brand | DEEWISH #ad |
Manufacturer | Deewish #ad |
Height | 0.75 Inches |
Length | 2.6 Inches |
Width | 2.2 Inches |
Part Number | DEEWISH-001 |
More information #ad
6. TIKROUND
#ad
12888 Quartz DIY Wall Clock Movement Mechanism Battery Operated DIY Repair Parts Replacement with 4 Sets Hands Total Shaft Length 23/32 inch .…
#adTIKROUND #ad - High torque "i" shaft clock movement: suitable for 4 - 8 mm 5/ 32 - 5/16 inch thickness clock panel. Diy clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.Package contents: 1 clock movement with 1 hook, 2 Minute hands and some mounting hardware, 2 Hour hands, coming with specially designed box and instructions.
More information #ad
Parameter: "i" shaft, drive long clock hands 10 mm to 450 mm; Total shaft length is 18. 5 mm 23/32 inch, thread length is 8 mm 5/16 inch. Long spindle quartz clock replacement movement parts with metal hook, Good for repairing, replacing or making a clock.Brand | TIKROUND #ad |
Manufacturer | TIKROUND #ad |
Weight | 0.13 Pounds |
Part Number | TIKROUND-M-120 |
Model | TIKROUND-M-120 |
More information #ad
7. TIKROUND
#ad
Youngtown High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands
#adTIKROUND #ad - 203 mm/ 8. 0 inches long; the minute hand is about 305 mm/ 12 inches in length. Diy clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.Warm notice: when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them.
More information #ad
Size from the hole center to the tip: the hour hand is approx. Movement size: total shaft length is 23 mm 29/32 inch, thread length is 12mm 15/32 inch, suitable for 4 - 8 mm 5/ 32 - 5/16 inches thickness clock panel. Clock movement replacement: high torque clock with 2 hooks, long shaft, drive long clock hands 10 mm to 450 mm.Brand | TIKROUND #ad |
Manufacturer | TIKROUND #ad |
Height | 2.2 Inches |
Length | 0.63 Inches |
Width | 1.5 Inches |
Part Number | C-003 |
Model | c-003 |
More information #ad
8. EMOON
#ad
EMOON 6 Pieces Clock Mechanism Replacement Kit with 9 Pack Clock Hands, Custom Clock, Silent Sweep Clock Motor Kit Battery Operated for Clock Repair DIY Replacement
#adEMOON #ad - 9 pack clock hands: including modern and retro classic clock hands, fit for clock face from 5~12 in diameter; you can pick out the style and length of the hands that look best for clock replacement or DIY at no additional charge.Choose the suitable clock mechanism: total shaft length is 7/8 in, this kit fit clock dials from from 3/8 in - 1/2 in thick, thread length is 3/4 in, making you smile of the memories your old clock gives you.
More information #ad
A deluxe combo for clock maker lover: one set include 6 pack clock hands, craft clock, 9 pack clock mechanism for clock repair or clock DIY, clock repairing, applicable to three-dimensional embroidery, replacing or making a clock. Emoon diy clock repair kit: comes as 6 clock movements with 9 pack hands kit in a presentation box with custom foam inserts to protect all from scratching, bending, and other damage while shipping. Time-keeping and sweep movement motor: features High precision Clock Mechanism, ensures watchmaker's accuracy; silent movement; powered by a AA battery, easy hang up on the nail included.
Brand | EMOON #ad |
Manufacturer | EMOON #ad |
Part Number | ALAT015-B-7/8 |
Model | ALAT015-B-7/8 |
More information #ad
9. TIKROUND
#ad
17/32 Inch Total Shaft Length., Youngtown 12888 Step Quartz Movement Repair Part with Hour Trigger Switch.7/64 Inch Maximum Dial Thickness
#adTIKROUND #ad - Movement total shaft length is 13. 5 mm 17/32 inch, thread length is 5. 5 mm 7/32 inch. Movement suitable for Clock Dial Thickness less than 7/64 inch. Good for repairing, replacing or making a clock.More information #ad
Youngtown manufactures the 12888 series in various models, Please check the dimensions of this movement prior to purchase to verify the dimensions. Applicable to cross-stitch, frameless draw clock, craft clock, three-dimensional embroidery, etc. Instructions - Included along with the movements.Brand | TIKROUND #ad |
Manufacturer | TIKROUND #ad |
Height | 7.87 Inches |
Length | 8.86 Inches |
Width | 0.01 Inches |
Part Number | TIKROUND-M-037 |
Model | TIKROUND-M-037 |
More information #ad
10. Hicarer
#ad
High Torque Quartz Clock Movement Replacement Parts with 208 mm/ 8.2 Inches Long Spade Hands and Hanger 20 mm 4/5 inches
#adHicarer #ad - Material and note: the clock pointer is made of aluminum, please check the size before purchase, please do not use too much pressure to avoid bending, suitable for AA battery.Parameter of the kit: i shaft, high torque clock mechanism, drive long clock hands from 10 mm to 450 mm. Size from center of the hole to tip: the hour hand is 154 mm/ 6. 1 inch; minute hand is 208 mm/ 8.
More information #ad
2 inch; second caps is 7 mm/ 028 inch. Package contents: a clock movement with hook, 2 hands and some mounting hardware, come with the specially designed protect cardboard box and instructions. Movement size: suit for 4 - 8 mm 4/ 25 - 3/ 10 inches thickness clock panel, the total shaft length is 20 mm 4/ 5 inches, thread length is 11. 7 mm 9/ 20 inches.Brand | Hicarer #ad |
Manufacturer | Hicarer #ad |
Height | 0.79 Inches |
Length | 11.81 Inches |
Weight | 0.15 Pounds |
Width | 5.12 Inches |
Part Number | Hicarer-High Torque Quartz-01 |
More information #ad