Top 10 Magnetic Id Badge Holder – Badge Holders

As an Amazon Associate I earn from qualifying purchases.

1. Specialist ID

#ad

Heavy Duty Magnetic Badge Holders, Perfect for 2 Vertical I.D. Badges by Specialist ID, 5 Pack, Fold Over Shirt Pocket or Belt- Two Sided for Multiple ID Cards

#ad
Specialist ID #ad - Double sided holds two id badges - two pockets - front and back with clear Protector Window - Insert Size 3 3/8" X 2 5/16" - Can Remove One Card at a Time or The Whole Unit at Once.

Keeps name badge holder firmly in place - display your identification, Keep your Credential or Access Card Handy and Out of The Way - No Dangling or Twisting Better than a Lanyard - Top Load Means Fewer Lost Cards. Safe for magnetic cards - shielded magnet pocket Card Protector Does Not Interfere with Info from Swipe Cards - Simple Plastic Vinyl Holders for Everyday Use. Heavy duty - strong magnets - great for shirt or suit pocket or fold over Belt Placement - Securely Clips to any Breast Pocket, from Wool Coats to Fancy Dress Shirts to Nurse Scrubs. Will not damage clothing - magnetic backing - No Pin or Clip to Make Holes in Shirts or Suit Pockets while Displaying Name Tag.
BrandSpecialist ID #ad
ManufacturerSpecialist ID #ad
Height1.5 Inches
Length6.5 Inches
Weight0.55 Pounds
Width4.5 Inches
Part NumberSPID-1150

2. Magreen

#ad

24 Pack Name Tags/ID Badge Magnets, Strong Magnetic Name Badge Holders with Steel Back Plate, Fastener with Adhesive on Front Plate,Strength Neodymium Magnets

#ad
Magreen #ad - 100% money-back guaranteeif these magnet name badge don't live up to your expectations, you can send them back for a full refund.

To avoid the damage of your clothing. Smart designmagnetic badge holder with steel back plate with 2 strong rare earth neodymium magnets and 3M adhesive front plate. Super strongtwo pieces permanent magnet set can be attach direactly to clothing, do not need any pins, clips. Dimensions24 pack of premium quality magnetic name tag/ID Badge Holders size:1. 8 inch long x 05 inch wide x 025 inch thickness. Multi-purposegreat for conferences, office, trade shows, arts, hotel, school, crafts, etc.
BrandMagreen #ad
ManufacturerMagreen #ad
Weight0.64 Pounds
Part NumberMNBH24

3. ExcelMark

#ad

Magnetic Name Tage Holders with 3 Magnets, ExcelMark 3 Name Badge Magnets

#ad
ExcelMark #ad - Each badge has 3 extra strong neodymium magnets. Two piece design with front magnetic plate features adhesive backing to easily hold name tag, badge or ID. Dimensions: 1-3/4" long x 1/2" wide x 1/4" thickness. Perfect for office, school, crafts and much more. 3 sets of premium quality ExcelMark Magnetic Badge Holder with Adhesive Fastener.
BrandExcelMark #ad
ManufacturerDiscount Rubber Stamps #ad
Height0.5 Inches
Length2 Inches
Weight0.03 Pounds
Width1 Inches
Part NumberMagnets-3

4. GOVO

#ad

GOVO Badge Holder/Wallet, Durable Polycarbonate ID/Credit Holder with Metal Clip and 4 Cards Slot Holds 1to 4 Cards Black

#ad
GOVO #ad - Patented spring-loaded card holding system: it holds cards well no matter it is loaded with 1 card or 4 cards. The opening on top of the clip is designed for connecting to lanyard or carabiner. Weights 1.

4 oz. You can carry your credit cards, driver license and work ID all in one in this compact holder. The spring holds cards on the sides so it won’t damage your cards or let them slip out. Durable and light weight: the holder’s body and screen are made from 2mm thick polycarbonate and secured by steel fasteners. Unlike plastic retainer, metal spring does not lose elasticity. The steel clip can also be used as a cash clip.

Designed and engineered by govo in ohio, usa. The clip is made from manganese steel making it strong and durable. Doubles as a wallet: the govo t4 can be used as a wallet thanks to its’ 4 cards capacity. Patented clip: the first and only badge holder with a metal clip allow you to carry your ID on your belt, key chain, pocket, backpack or a lanyard.
BrandGOVO #ad
ManufacturerGOVO #ad
Height0.38 Inches
Length3.8 Inches
Weight0.08 Pounds
Width2.6 Inches
Part NumberGOVO_BK_P

5. Will Well

#ad

27.5" Steel Wire Cord, Will Well Metal ID Badge Holder with Belt Clip Key Ring for Name Card Keychain All Metal Casing, 2 Pack Heavy Duty Retractable Badge Holder Reel, Reinforced Id Strap

#ad
Will Well #ad - Comes with key ring and perfect as retractable key chain. Package includes 2pcs retractable id badge holder with reel clip and ID strap, last forever. Easily clip on to belts, medical and office staff, men and women. Perfect name card badge holder for any industry, purse straps, custodians, employees, students, factory workers, police, security staff, government, military, pockets, airport FAA and TSA, teachers, maintenance, outdoor enthusiast and etc.

Unlock doors and access office is a breeze with this retractable badge reel. Solid reel clip the clip is screw-fastened in the back side so no need to worry that it will fall off. Non-breakable cord 27. 5" steel wire cord that is much stronger and longer than normally 24 inch Nylon pull cord of other items. Buy with confidence please don't hesitate to contact us via Amazon message system if at any time you aren't completely satisfied with your purchased, we will try our best to make things right.

Build to last all metal zinc alloy construction with steel wire cord makes the most durable retractable badge holder, tested under more than 100, 000 pulls. Great for nurses, backpacks or anywhere you like. Heavy duty max loading weight is 150g/5. 3oz or 8 keys compares to 85g/3oz or 4 keys of other items on the market.
BrandWill Well #ad
ManufacturerWill Well #ad
Part Number3

6. J O'Brien

#ad

Vertical Heavy Duty Made in The USA Magnetic Badge Holder Matte Black Vinyl | Fold Over Pocket or Belt Sold Individually

#ad
J O'Brien #ad - Heavy duty, high quality Matte Black Vinyl Only Available in the USA. Made in the usa by a woman-Owned Small Business in New Jersey. Powerful magnets clip easily to Your Shirt Pocket, Belt, Blouse, or Jeans. A thumb notch makes Getting Your ID Easy and Efficient. Crystal clear vinyl Covers and Protects Your ID.
BrandJ O'Brien #ad
ManufacturerJ O'Brien #ad
Weight0.08 Pounds
Part Number9705

7. ExcelMark

#ad

ExcelMark 10 Name Badge Magnets, Magnetic Name Tag Holders with 3 Premium Strength Neodymium Magnets

#ad
ExcelMark #ad - Dimensions: 1-3/4" long x 1/2" wide x 1/4" thickness. Two piece design with front magnetic plate features adhesive backing to easily hold name tag, badge or ID. Perfect for office, school, crafts and much more. 10 sets of premium quality ExcelMark Magnetic Badge Holder with Adhesive Fastener. Each badge has 3 extra strong neodymium magnets.
BrandExcelMark #ad
ManufacturerDiscount Rubber Stamps #ad
Height0.6 Inches
Length2.5 Inches
Weight0.03 Pounds
Width1.75 Inches
Part NumberMagnets-10
ModelMagnets-10

8. totalElement

#ad

Strong Fastener with 3M Adhesive on Front Plate Silver 10-Pack, totalElement Magnetic Name Tag/ID Badge Holder

#ad
totalElement #ad - Simple multi-purpose design works for arts & crafts, hanging signs and posters, and attaching other accessories to clothing. Strong, safe and secure way to attach and show credentials without damaging clothing or uniform. Name tags/Badges Sold Separately. Dimensions: 44mm 1. 75” long by 12mm 05” wide. Front magnetic plate has adhesive backing to easily hold name tag, badge or ID. 10 sets of badge holders Included.
BrandtotalElement #ad
ManufacturertotalElement #ad
Height0.5 Inches
Length1.75 Inches
Weight0.25 Pounds
Width0.25 Inches
Part NumberTESILVERBADGE

9. AmazonBasics

#ad

Pack of 20, Clear, AmazonBasics Horizontal Magnetic Badge Holder

#ad
AmazonBasics #ad - Pack of 20 magnetic badge holders keeps badges secure, clean, and prominently displayed. Measures 3 by 4 inches by 8 mil thick; backed by an AmazonBasics 1-year limited warranty. Durable design made of PVC-free polypropylene with curved corners; sealed on 3 sides; top loading. 1 magnet pre-attached to badge holder; 2nd magnet removable to be placed behind clothing; magnets won't damage clothing when attached/removed. Compatible with any 3x4-inch badge insert, displayed horizontally; pre-punched holes for optional lanyard attachment not included.
BrandAmazonBasics #ad
ManufacturerAmazonBasics #ad
Height3.35 Inches
Length4.33 Inches
Weight0.03 Pounds
Width0.26 Inches
Part NumberKK2491A
ModelKK2491A

10. BBTO

#ad

BBTO 24 Pieces Magnetic Name Badge Round Adhesive Name Tag Holders with Plastic Storage Box for Name and Circle Badges Diameter of 1.7 cm/ 0.67 inch

#ad
BBTO #ad - Wide applications: work for hanging signs and posters and attaching other accessories to clothing, circle badges, suits for button badges, brooches, lapel pins and small name tags.

Effective combination: the magnetic plate combines with adhesive side, the inside can attach to the outside through the clothes, holding your name tags easier and more firmly. Plastic storage: we prepare a clear plastic box which can be seen through for storage, more convenient for your daily use and storage. Quantity and size: there are 24 pieces round name tag holders in total; optional name badge holder size for you to choose, 067 x 024 inch/ 1. 7 x 06 cm or 079 x 02 inch/ 2 x 05 cm, meeting your different needs. More secure way: the magnet name tag holder displays your name tag in a more secure way easily without damaging clothing or uniform.
BrandBBTO #ad
ManufacturerBBTO #ad
Height0.94 Inches
Length2.68 Inches
Width1.97 Inches
Part NumberBBTO-Badge Holders-01